Length | 12,60 m |
Width | 9,60 m |
Ridge height | 6,40 m |
Area | 120,00 m² |
Weight | 850 kg |
Packing size | 3 stanchion boxes 1545 x 1180 x 1200 for 1 tent section each |
Number of entrances / emergency exits | 2 |
Number of vehicle doors | 1 |
Truss spacing | 2,20 m |
Roof pitch | 17° + 22° |
Air chambers | 3 |
The tent is assembled from 3 individual parts and joined together using a zipper system.
The material of the roof and walls consists of a high-quality PVC fabric with a grammage of 850g/m². The special fabric is:
Each gable end has an entrance measuring approx. 1.20 m x 2.00 m. Each entrance can be rolled up using a zipper system. The vehicle door has dimensions of W 4.50 m and H 4.35 m. The door can be rolled up from the ground using a rope system.
There are 2 lockable feed-throughs on each long side to accommodate heating hoses and 2 feed-throughs for supply lines. The tent also has a lead-through for exhaust gas removal.
The scaffolding material is an inflatable shoring using 3 pneumatically separated air chamber systems. The shoring is equipped with 2 inflation valves for inflating and deflating the compressed air and 2 pressure relief valves to prevent the air chambers from over-inflating. The scaffold is made of 900g/m² PVC fabric coated on both sides and is high-frequency welded.
Eyelets for hanging lamps, infusion bottles etc. are attached to all longitudinal and cross beams of the scaffolding.
The floor is made of polyester fabric coated on both sides, color grey. It is flame-retardant in accordance with DIN 4102 B1 and is firmly sewn to the tent skin.